Page 1 of 4

Shooting Range in Bennington!

PostPosted: Fri Apr 25, 2008 1:54 pm
by Hedge
Hale Mt. Fish & Game Club
PO Box 1
Bennington, VT 05201
Phone: (802) 442-6470
Type of Range: 1,2,3,8,9,10,11,12
Open to public for fee. Call ahead for permission.

Key to type of shooting range
(1) Small Caliber, (2) Large Caliber, (3) Hand Gun, (4) Archery (5) 3-D Archery Course
(6) Outdoor, (7)Indoor, (8) Hunter Education Use, (9) Public Use, (10) Use as a Guest, (11) Fee Charge, (12) Shotgun Trap, (13) Shotgun Skeet, (14) Shotgun Sporting Clays

PostPosted: Fri Apr 25, 2008 5:06 pm
by JEnfield
Hedge I wonder if they would let me shoot my 50 its small bore compared to a howitzer.

Jimmy

PostPosted: Fri Apr 25, 2008 7:07 pm
by Boondox
Many of us up here in rural Vermont have our own ranges. Mine uses the 30 foot thick base of a pond as a backstop and would handle anything short of a 40mm grenade launcher. Gawd how I miss those old bloopers!

PostPosted: Fri Apr 25, 2008 7:35 pm
by Hedge
JEnfield wrote:Hedge I wonder if they would let me shoot my 50 its small bore compared to a howitzer.

Jimmy

Jimmy - I hope your kidding! Please do not risk transporting any weapons interstate. We can use there stuff up there if we hit the range to blow off some rounds.

Since it is my BIG 50 on Monday it is Johnny's Birthday Weekend. Tomorrow i will spend the day with one of my buddies at no less than 6 different gun shops prowling around to see if anything interests me. I am definitely buying an HK45c, it is just a matter of pricing now. I think i found a dealer that I'm very comfortable spending almost 1K for the piece. Ya got to love going into a good gun shop - nothing like it for me! :D

PostPosted: Fri Apr 25, 2008 7:43 pm
by b_mason
You mean I can't tuck my 1911-a1 in my tank bag?

I Have a shooting range and an archery range here at home. The wife just won't let me get a .50 cal barrett or any other .50 cal. You should of seen her eyes when we watched the shooting gallery and a 9year girl was shooting .50's in a match in Ohio. I will be up for some plinking around, maybe on Sunday. I have monday off so I don't have to run back home.

PostPosted: Fri Apr 25, 2008 8:24 pm
by Hedge
Brett - you actually could because you are traveling from Main to VT where your CCP will be legal. My CCP is no good going through NY and MASS but is good once I get inside of VT. However, I choose NOT to risk illegally transporting firearms through States that don't recognize my permit.

PostPosted: Fri Apr 25, 2008 9:23 pm
by b_mason
I haven't completed the ccp process yet. In Maine I could carry the pistol on the dash of the bike(if it would stay there), clip in the other bag, ammo in the other side bag.

I got stopped speeding last summer about a week after I was scouting a hunting area. Forgot I put my .45 in the center console, clips in the glovebox then went into the store. Read a newspaper then went home. A week later state police pulled me over to tell me I was speeding, the clips fell out of the glove box when I got my registration. He asked me if I had a firearm......UUUUHHHHH YeS Sir! Pulled the pistol out of the center console in a manner so he could see everything. He actually laughed when I answered no the the ccp question. He then told me how to get the process started, wanted to check out my .45 to make sure it wasn't loaded. Told me to have good day and let me go. Now I carry the .45 on the dash while driving ammo locked in the glove box. I will not carry it on the Sprint until the ccp process is finished.

I shall use the ones offered while I'm there if that is cool.

PostPosted: Fri Apr 25, 2008 9:43 pm
by matts1050
Stupid me-I let my CCP expire!

PostPosted: Sat Apr 26, 2008 6:35 am
by Hedge
matts1050 wrote:Stupid me-I let my CCP expire!

Get it again before the election - there is a lot of chatter about them clamping down on the CCP's and the 10 year ban might come back on assault rifles.

PostPosted: Sat Apr 26, 2008 8:04 pm
by JEnfield
I have a Delaware and a PA but my course of travel takes me through NJ and thats a big NONO . Hedge My man I work part time for a Gun Shop email me before you buy let me give you a price. I just ordered a new SIS Kimber for carry the glock 32C is being retired to the night stand.

Jimmy

PostPosted: Sun Apr 27, 2008 8:52 am
by Hedge
JEnfield wrote:I have a Delaware and a PA but my course of travel takes me through NJ and thats a big NONO . Hedge My man I work part time for a Gun Shop email me before you buy let me give you a price. I just ordered a new SIS Kimber for carry the glock 32C is being retired to the night stand.

Jimmy

Jimmy - thx my Brother! Get me a Best price Quote on a Brand New 2008 HK45c shipped to my FFL in CT 06490

PostPosted: Sun Apr 27, 2008 3:59 pm
by JEnfield
I will stop by the shop tuesday I buy at dealer cost so it should save some jingle .

Jimmy

PostPosted: Sun Apr 27, 2008 8:00 pm
by Hedge
I think the brand new 2nd generation HK45c is now $850 with the dollar getting ass-fucked by the Euro. If it is a 1st Generation from earlier this year it will be around $799. If you can do better than $850 for the 2nd generation I would appreciate it. The difference between the 1st generation and 2nd generation is that the 2nd generation has a bigger slide notch and the stamping is deeper and more profound and the Blueing is deeper and richer.

PostPosted: Sun Apr 27, 2008 9:15 pm
by JEnfield
Gotcha I am not real up to date on HK unless we are talking shotguns. I prefer the old 1911 frame it fits my hand well and over the years of shooting comp I have learned how to get a good hand fit and grip. I got to shoot a USP40 but didn't really care for it. Its like anything else it is what your used to and what you like. Is your email in your profile?

Jimmy

PostPosted: Mon Apr 28, 2008 7:14 am
by b_mason
Jimmy,

I love the way my 1911 fits my hand, I don't really have to move my thumb to drop the clip. Now all I need to do is get it accurized. It shoots good but I want a bushing-less barrel with a comp on it. I tend to be very relaxed when I shoot so there is a appearance of extreme power from the muzzle flip. If you know anyone that is good with the 1911 and make it very accurate I would loveto tlka to them. I had some work done to it to make it more reliable while using 180gr to 230gr semi-wad cutters to round nose bulletts. Have you ever shot the MP5? It is one of my holy grail smgs, second only to the thompson. I just lack the disposable income to buy them.